- Postcode district
- CF83
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Risca, Pontypridd, Blackwood
- Building rules
- Wales
Is a sliding door for a new opening a good fit for your home in Caerphilly?
A few practical points decide whether sliding doors for new openings suit a particular room and opening:
Turning a Caerphilly kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
Thinking about a wider opening in Caerphilly but unsure of the size? Mark it out on the wall inside and out with tape, then picture the furniture and the view before you decide.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
Daylight in Caerphilly and what it means for your glass
Because Caerphilly sees long summer days (about 16 h 39 min) and short winter ones (about 7 h 49 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do sliding doors for new openings cost in Caerphilly?
These figures combine an aluminium sliding door with the building work to form or widen the opening, including structural calculations and VAT. Your price is fixed in a written quote once the wall in your Caerphilly home has been surveyed; council fees are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 4.0 m | 3 panels | £10,295–£11,595 |
| 4.8 m | 4 panels | £11,495–£12,995 |
| 6.0 m | 4 panels | £13,295–£15,095 |
See every size on the sliding doors for new openings page or try the guide price tool.
How fitting works in Caerphilly
Here is the usual sequence in Caerphilly: guide price, free survey, written quote, any building work, then manufacture (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals). Fitting typically takes 3–5 days of building work, then 1–2 days to fit the door. Nearby, we also survey in Risca, Pontypridd and Blackwood.
Do you need approval in Caerphilly?
Widening an opening in Wales means a Building Regulations application for the structural work, calculations for the beam, and a door that meets Approved Document L (Wales). Party wall notices may be needed in semi-detached and terraced homes.
Finishes and extras for sliding doors for new openings
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
Questions about sliding doors for new openings in Caerphilly
Can you match other doors and windows in my Caerphilly home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.