- Postcode district
- CF83
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Risca, Pontypridd, Blackwood
- Building rules
- Wales
Are slimline sliding doors right for your Caerphilly home?
The right door depends on the opening, the room and the way you use the garden. Here is how slimline sliding doors tend to work out in practice:
Is the patio behind your Caerphilly home level with the floor inside? If so, a flush threshold with an outside drainage channel can make the two read as one surface.
Where the plans for a Caerphilly project show a wide glazed rear wall, the structural engineer should know the panel weights early so the steel can be sized for them.
- Multi-point locking is concealed within the slim interlock and frame, keeping hardware out of sight while still engaging several points when the door closes.
- Interlocks of around 20–25 mm leave the meeting point between panels as a thin line, so the view across the door is close to uninterrupted glass.
- Outer frames can be recessed into the floor, reveals and head, hiding almost all of the aluminium so that only glass and the narrow interlock remain visible.
Planning glass for the light in Caerphilly
Because Caerphilly sees long summer days (about 16 h 39 min) and short winter ones (about 7 h 49 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for slimline sliding doors in Caerphilly
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £6,895–£8,395 |
| 4.0 m | 3 panels | £8,395–£10,195 |
| 4.8 m | 3 panels | £9,595–£11,695 |
See every size on the slimline sliding doors page or try the guide price tool.
How fitting works in Caerphilly
Here is the usual sequence in Caerphilly: guide price, free survey, written quote, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 1–2 days; allow 3–5 days of building work first if the opening is formed or widened. Nearby, we also survey in Risca, Pontypridd and Blackwood.
Rules for slimline sliding doors in Wales
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Finishes and extras for slimline sliding doors
- Concealed frame. Recess the outer frame into the floor, reveals and ceiling so almost no aluminium shows from inside.
- Threshold detail. A low threshold for straight replacements, or a flush floor-to-terrace finish with a drainage channel on extensions.
- Colours. Black, anthracite grey, bronze-effect or a special RAL powder coat, with dual colour available.
Questions about slimline sliding doors in Caerphilly
How soon can you survey in Caerphilly?
Surveys in the CF83 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How much do slimline sliding doors cost?
Slimline sliding doors start from a guide price of £5,095 for a 1.8 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £5,995–£7,295, and a 4.8 m three-panel door is around £9,595. Concealed frames, triple glazing and flush thresholds add to the figure, and the final price is fixed in a written quote after survey.
What is the lead time for slimline sliding doors?
Slimline sliding doors typically take 6–8 weeks to manufacture after survey sign-off, because the profiles are precision-made and the glass units are large. Fitting typically takes 1–2 days. If the frame is being concealed in a new floor or ceiling, the recesses are formed during the building work, and a sub-frame may be set in place before the screed and plaster go on.
How do you clean a slimline sliding door?
Clean a slimline sliding door by vacuuming the stainless track, wiping it with a damp cloth and washing the glass and frames with mild soapy water. A flush threshold's outside drainage channel needs clearing of leaves and grit, because it is what keeps water away from the floor. Large panes are easier with a long-handled squeegee. Manufacturer guarantees are passed to you, with our workmanship guarantee set out in writing in your quote.