- Postcode district
- CF83
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Risca, Pontypridd, Blackwood
- Building rules
- Wales
What uPVC sliding patio doors offer homes in Caerphilly
Before you settle on a door type, it helps to know what uPVC sliding patio doors do well and what to check before you order.
Planning a door wider than about 3.6 m for your Caerphilly home? That is beyond the uPVC range, so aluminium or a multi-track system would be the next step.
Replacing a tired patio door in Caerphilly? A uPVC slider usually fits the existing opening, so the job is a straight swap rather than building work.
- As the least expensive sliding door material, uPVC lets you replace a draughty older patio door with modern double glazing on a modest budget.
- Steel reinforcement inside the main profiles keeps the frame rigid, holds the locking hardware firmly and stops the sliding panel flexing over the years.
- Woodgrain and colour foils, including anthracite grey and black, let a uPVC door match existing windows instead of appearing as a white frame on a coloured elevation.
Planning glass for the light in Caerphilly
Sun angles matter for big glazed doors. Around Caerphilly, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do uPVC sliding patio doors cost in Caerphilly?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Caerphilly home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 1.8 m | 2 panels | £1,895–£2,295 |
| 3.6 m | 3 panels | £2,895–£3,495 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
How fitting works in Caerphilly
Here is the usual sequence in Caerphilly: guide price, free survey, written quote, then manufacture (typically 2–4 weeks from survey sign-off). Fitting typically takes 1 day for a straight swap in an existing opening. Nearby, we also survey in Risca, Pontypridd and Blackwood.
Do you need approval in Caerphilly?
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Choosing the specification
- Glass. Toughened double glazing as standard, with laminated, obscure or solar-control units available.
- Foiled colours. Anthracite grey, black, cream or woodgrain foils on one or both faces, for an extra charge.
- Panel layout. Choose which side slides, or a three-panel layout for openings beyond about 3 m.
Questions about uPVC sliding patio doors in Caerphilly
Can you match other doors and windows in my Caerphilly home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How much do uPVC sliding patio doors cost?
uPVC sliding patio doors start from a guide price of £1,695 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £2,195–£2,695, and a 3.6 m three-panel door is around £2,895. Coloured foils, glass upgrades and a low threshold move the figure up, and the final price is fixed in a written quote after survey.
Are uPVC sliding doors secure?
uPVC sliding doors are secure when the sliding panel has multi-point locking, anti-lift protection and steel reinforcement in the frame. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets. Laminated glass adds resistance to breaking through, and a key-locking handle stops the door being opened from inside if a pane is broken.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.