- Postcode district
- BN18
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Littlehampton, Bognor Regis, Worthing
- Building rules
- England
Are lift and slide doors right for your Arundel home?
Most homeowners choosing lift and slide doors want the same things: more light, a clear view and a door that is easy to live with.
If rear access to your Arundel property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
Comparing lift and slide with slimline for an Arundel project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
Daylight in Arundel and what it means for your glass
In Arundel the shortest day has roughly 7 h 56 min of daylight and the longest about 16 h 31 min. The noon sun sits near 16° above the horizon in winter and 63° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Lift and slide doors prices in Arundel
Pricing is transparent and does not change because you are in Arundel. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
How fitting works in Arundel
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Rules for lift and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
Questions about lift and slide doors in Arundel
Can you match other doors and windows in my Arundel home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Will I need Building Regulations approval for a large lift and slide door?
A large lift and slide door often needs Building Regulations approval for the structural work, because forming or widening an opening in England needs an application, structural calculations and usually a steel beam. The door itself is a controlled fitting, installed by a competent person scheme installer or notified to Building Control, with safety glazing throughout. Scotland needs a building warrant for a new or wider opening; Wales and Northern Ireland have their own rules.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
Do lift and slide doors need servicing?
Lift and slide doors need light, regular care rather than heavy servicing: keep the track and drainage clear, wipe the gaskets with a damp cloth, and check the handle gear runs smoothly once a year. Because the seals are not dragged during opening, they wear slowly. If a panel ever drops unevenly, the rollers and lifting gear can be adjusted, and a worn gasket can be replaced on its own without changing the panel.