Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Lift and slide doors
Lift and slide doors · BN17

Lift and slide doors in Littlehampton

Planning lift and slide doors for a home in Littlehampton? We measure, make and fit to your opening across West Sussex, with Building Regulations compliance arranged and the certificate sent to you.

Postcode district
BN17
Survey
Free for new and replacement doors
Typical lead time
Typically 6–8 weeks from survey sign-off
Guide price
From £7,495 inc VAT
Nearby
Arundel, Bognor Regis, Worthing
Building rules
England

Lift and slide doors in Littlehampton: what to know

These are the points a surveyor will go through with you when you choose lift and slide doors for a home in Littlehampton:

Comparing lift and slide with slimline for a Littlehampton project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?

Planning a terrace door wider than about 4 m in Littlehampton? Lift and slide hardware lets each panel be larger, so the opening needs fewer interlocks.

  • Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
  • Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
  • Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.

Planning glass for the light in Littlehampton

June 63°Dec 16°

Sun angles matter for big glazed doors. Around Littlehampton, midday sun reaches about 63° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.

Guide prices for lift and slide doors in Littlehampton

Guide prices are the same across West Sussex: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.

Guide prices for lift and slide doors in Littlehampton
Overall widthTypical panelsGuide price (fitted, inc VAT)
4.0 m2 panels£10,395–£12,695
4.8 m3 panels£11,795–£14,395
6.0 m3 panels£13,995–£16,995

See every size on the lift and slide doors page or try the guide price tool.

How fitting works in Littlehampton

We plan the job around your home in Littlehampton: survey first, then a written quote, then manufacture (typically 6–8 weeks from survey sign-off). The fitting itself usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. If you are in Arundel or Bognor Regis, the same process and prices apply.

Rules for lift and slide doors in England

In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.

Which options matter for lift and slide doors?

  • Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
  • Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
  • Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.

Questions about lift and slide doors in Littlehampton

Do you fit lift and slide doors in Littlehampton?

Yes. We survey and fit lift and slide doors in Littlehampton and across West Sussex, including nearby Arundel and Bognor Regis. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.

Will I need Building Regulations approval for a large lift and slide door?

A large lift and slide door often needs Building Regulations approval for the structural work, because forming or widening an opening in England needs an application, structural calculations and usually a steel beam. The door itself is a controlled fitting, installed by a competent person scheme installer or notified to Building Control, with safety glazing throughout. Scotland needs a building warrant for a new or wider opening; Wales and Northern Ireland have their own rules.

How does a lift and slide door work?

A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.

Are lift and slide doors more weathertight than standard sliders?

Lift and slide doors are generally more weathertight than standard inline sliders, because the panel's weight compresses firm gaskets when closed instead of relying on brush seals it rubs past. Typical whole-door U-values are around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed. In England, a door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better; Wales, Scotland and Northern Ireland have their own rules.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote