- Postcode district
- EX14
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Sidmouth, Chard, Tiverton
- Building rules
- England
Are sliding doors for new openings right for your Honiton home?
Before you settle on a door type, it helps to know what sliding doors for new openings do well and what to check before you order.
For homes in Honiton that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
Where a Honiton house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
Daylight in Honiton and what it means for your glass
At the latitude of Honiton, the midday sun climbs to about 63° in late June but only about 16° in late December, when daylight lasts around 7 h 57 min against 16 h 31 min in midsummer. A south-facing sliding door for a new opening lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for sliding doors for new openings in Honiton
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £6,995–£7,795 |
| 2.1 m | 2 panels | £7,495–£8,295 |
| 2.4 m | 2 panels | £7,895–£8,895 |
See every size on the sliding doors for new openings page or try the guide price tool.
Timescales for sliding doors for new openings in Honiton
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals), and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door. If you are in Sidmouth or Chard, the same process and prices apply.
Do you need approval in Honiton?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Options to consider for your sliding door for a new opening
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
Questions about sliding doors for new openings in Honiton
Is the price different in Honiton?
No. Guide prices for sliding doors for new openings are the same across mainland Britain, including Honiton. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How much does it cost to widen an opening for sliding doors?
Our guide price for forming or widening an opening is £3,595 for 2.4 m and £4,495 for 4.8 m, covering steel, padstones, making good and structural calculations. The door is priced separately, and Building Control fees are set by your council. All figures are guide prices inc VAT, fixed in a written quote after we survey the wall and see what is above it.
Do I need building regulations to widen a door opening?
Yes, forming or widening an opening is structural work and needs a Building Regulations application in England, supported by structural calculations. Building Control inspects the work, typically including the steel and its bearings. In Scotland a building warrant is needed. Wales and Northern Ireland follow their own building regulations through local authority or district council building control.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.