- Postcode district
- EX17
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Exeter, Tiverton, Okehampton
- Building rules
- England
Is a sliding door for a new opening a good fit for your home in Crediton?
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
For homes in Crediton that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
If your Crediton home is semi-detached or terraced and the new steel would sit on the shared wall, budget time for party wall notices before work starts.
- Structural calculations are included in the guide price, and the Building Regulations application is handled as part of the project, so you are not left coordinating engineers and inspectors.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
Daylight in Crediton and what it means for your glass
The midday sun over Crediton ranges from about 16° at the winter solstice to about 63° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Typical costs for sliding doors for new openings around Crediton
These figures combine an aluminium sliding door with the building work to form or widen the opening, including structural calculations and VAT. Your price is fixed in a written quote once the wall in your Crediton home has been surveyed; council fees are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £7,495–£8,295 |
| 3.6 m | 3 panels | £9,695–£10,895 |
| 4.0 m | 3 panels | £10,295–£11,595 |
See every size on the sliding doors for new openings page or try the guide price tool.
From survey to fitted door in Crediton
Here is the usual sequence in Crediton: guide price, free survey, written quote, any building work, then manufacture (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals). Fitting typically takes 3–5 days of building work, then 1–2 days to fit the door. Nearby, we also survey in Exeter, Tiverton and Okehampton.
Do you need approval in Crediton?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for sliding doors for new openings
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
Questions about sliding doors for new openings in Crediton
Can you match other doors and windows in my Crediton home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Why does beam deflection matter for sliding doors?
Beam deflection matters because a sliding door needs a straight, level head to run properly. Every beam bends slightly under load, and if it bends too much the frame can be squeezed, making panels stiff or causing them to bind. Telling the structural engineer that a large sliding door will go underneath allows them to design a stiffer beam.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.