- Postcode district
- BH2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Christchurch, Poole, Ferndown
- Building rules
- England
What sliding doors for new openings offer homes in Bournemouth
Most homeowners choosing sliding doors for new openings want the same things: more light, a clear view and a door that is easy to live with.
Living in a Bournemouth flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
Turning a Bournemouth kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
- Structural calculations are included in the guide price, and the Building Regulations application is handled as part of the project, so you are not left coordinating engineers and inspectors.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
How much sun will a door in Bournemouth get?
Sun angles matter for big glazed doors. Around Bournemouth, midday sun reaches about 63° in summer and drops to about 16° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for sliding doors for new openings in Bournemouth?
These figures combine an aluminium sliding door with the building work to form or widen the opening, including structural calculations and VAT. Your price is fixed in a written quote once the wall in your Bournemouth home has been surveyed; council fees are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £6,595–£7,295 |
| 2.1 m | 2 panels | £7,495–£8,295 |
| 4.0 m | 3 panels | £10,295–£11,595 |
See every size on the sliding doors for new openings page or try the guide price tool.
Timescales for sliding doors for new openings in Bournemouth
Surveys in the BH2 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Rules for sliding doors for new openings in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Which options matter for sliding doors for new openings?
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
Questions about sliding doors for new openings in Bournemouth
Do you fit sliding doors for new openings in Bournemouth?
Yes. We survey and fit sliding doors for new openings in Bournemouth and across Dorset, including nearby Christchurch and Poole. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much does it cost to widen an opening for sliding doors?
Our guide price for forming or widening an opening is £3,595 for 2.4 m and £4,495 for 4.8 m, covering steel, padstones, making good and structural calculations. The door is priced separately, and Building Control fees are set by your council. All figures are guide prices inc VAT, fixed in a written quote after we survey the wall and see what is above it.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
Why does beam deflection matter for sliding doors?
Beam deflection matters because a sliding door needs a straight, level head to run properly. Every beam bends slightly under load, and if it bends too much the frame can be squeezed, making panels stiff or causing them to bind. Telling the structural engineer that a large sliding door will go underneath allows them to design a stiffer beam.