- Postcode district
- BH2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Christchurch, Poole, Ferndown
- Building rules
- England
Sliding door replacement in Bournemouth: what to know
These are the points a surveyor will go through with you when you choose replacement sliding doors for a home in Bournemouth:
Does the old door in your Bournemouth kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.
Considering a wider door for your Bournemouth home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
Light and sun in Bournemouth
Because Bournemouth sees long summer days (about 16 h 30 min) and short winter ones (about 7 h 57 min), the elevation your door faces makes a real difference. With the midday sun at about 16° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Typical costs for replacement sliding doors around Bournemouth
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £4,295–£5,295 |
| 3.0 m | 2 panels | £4,995–£6,095 |
| 3.6 m | 3 panels | £5,595–£6,895 |
See every size on the replacement sliding doors page or try the guide price tool.
How fitting works in Bournemouth
Here is the usual sequence in Bournemouth: guide price, free survey, written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). Fitting typically takes 1 day for a straight two-panel swap; 1–2 days for larger doors. Nearby, we also survey in Christchurch, Poole and Ferndown.
Rules for replacement sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your replacement sliding door
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
Questions about replacement sliding doors in Bournemouth
How soon can you survey in Bournemouth?
Surveys in the BH2 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.