- Postcode district
- SA70
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Pembroke Dock, Milford Haven, Haverfordwest
- Building rules
- Wales
New and widened openings for sliding doors in Tenby: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
Where a Tenby house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
If your Tenby home is semi-detached or terraced and the new steel would sit on the shared wall, budget time for party wall notices before work starts.
- Structural calculations are included in the guide price, and the Building Regulations application is handled as part of the project, so you are not left coordinating engineers and inspectors.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
Planning glass for the light in Tenby
At the latitude of Tenby, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 48 min against 16 h 40 min in midsummer. A south-facing sliding door for a new opening lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for sliding doors for new openings in Tenby
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £6,595–£7,295 |
| 2.1 m | 2 panels | £7,495–£8,295 |
| 6.0 m | 4 panels | £13,295–£15,095 |
See every size on the sliding doors for new openings page or try the guide price tool.
From survey to fitted door in Tenby
A surveyor visits your Tenby home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals — and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Rules for sliding doors for new openings in Wales
Widening an opening in Wales means a Building Regulations application for the structural work, calculations for the beam, and a door that meets Approved Document L (Wales). Party wall notices may be needed in semi-detached and terraced homes.
Which options matter for sliding doors for new openings?
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
Questions about sliding doors for new openings in Tenby
Do you fit sliding doors for new openings in Tenby?
Yes. We survey and fit sliding doors for new openings in Tenby and across Dyfed, including nearby Pembroke Dock and Milford Haven. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Why does beam deflection matter for sliding doors?
Beam deflection matters because a sliding door needs a straight, level head to run properly. Every beam bends slightly under load, and if it bends too much the frame can be squeezed, making panels stiff or causing them to bind. Telling the structural engineer that a large sliding door will go underneath allows them to design a stiffer beam.
Do I need planning permission for a new opening?
Planning rules for altering an elevation depend on the property and where you are, so it is worth checking with your council before you commit. Flats, listed buildings and properties covered by an Article 4 direction are the most likely to need consent. Wales and Scotland have their own planning rules. Our planning guide sets out the questions to ask.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.