- Postcode district
- SA70
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Pembroke Dock, Milford Haven, Haverfordwest
- Building rules
- Wales
Why choose sliding doors for extensions in Tenby?
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
Self-building in Tenby or elsewhere in Dyfed? Ask for the sliding doors to be quoted as part of a wider glazing package so the frames, colours and glass match across the house.
When your Tenby extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
- Being involved at drawing stage means the opening is formed to suit the door, rather than the door being compromised to suit an opening built a few centimetres out.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
Sunlight, glass and orientation in Tenby
At the latitude of Tenby, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 48 min against 16 h 40 min in midsummer. A south-facing sliding door for an extension lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Typical costs for sliding doors for extensions around Tenby
Guide prices are the same across Dyfed. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 2.4 m | 2 panels | £5,995–£7,295 |
| 3.6 m | 2 panels | £7,795–£9,495 |
See every size on the sliding doors for extensions page or try the guide price tool.
What happens when you order sliding doors for extensions in Tenby?
A surveyor visits your Tenby home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Rules for sliding doors for extensions in Wales
In Wales, sliding doors in an extension are approved as part of the extension's Building Regulations application, and the glazing must meet the Welsh energy and safety glazing requirements, including the limits on how much of an extension can be glazed.
Which options matter for sliding doors for extensions?
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Three or four panels. More panels for wider extension openings, with one or more sliding.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Tenby
How soon can you survey in Tenby?
Surveys in the SA70 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
How much do sliding doors for an extension cost?
Slimline sliding doors for an extension have a guide price of £7,795–£9,495 for a 3.6 m opening and £9,595–£11,695 for a 4.8 m opening, fitted, inc VAT at standard 2.1 m height. Taller doors, extra panels, special glass and flush thresholds move the price. Your written quote after the check survey fixes it.