- Postcode district
- SA70
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks from survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Pembroke Dock, Milford Haven, Haverfordwest
- Building rules
- Wales
What uPVC sliding patio doors offer homes in Tenby
These are the points a surveyor will go through with you when you choose uPVC sliding patio doors for a home in Tenby:
If the windows on your Tenby home are white or woodgrain uPVC, uPVC sliding patio doors in a matching finish keep the rear of the house looking uniform.
The rules for a replacement door in Tenby are checked at survey, and your written quote says which approval route applies to your home.
- uPVC frames never need painting or staining; an occasional wipe with warm soapy water keeps white or foiled finishes looking clean.
- Compressible gaskets and brush pile seals along the interlock reduce the draughts and rattles that an older patio door with worn seals often suffers from.
- Steel reinforcement inside the main profiles keeps the frame rigid, holds the locking hardware firmly and stops the sliding panel flexing over the years.
Sunlight, glass and orientation in Tenby
In Tenby the shortest day has roughly 7 h 48 min of daylight and the longest about 16 h 40 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Typical costs for uPVC sliding patio doors around Tenby
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,695–£2,095 |
| 2.4 m | 2 panels | £2,195–£2,695 |
| 3.0 m | 2 panels | £2,495–£3,095 |
See every size on the uPVC sliding patio doors page or try the guide price tool.
How fitting works in Tenby
Surveys in the SA70 district are booked at a time that suits you. After you approve the quote, manufacture is typically 2–4 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight swap in an existing opening.
Do you need approval in Tenby?
In Wales, replacement doors are covered by the Building Regulations as applied in Wales, including the Welsh Part L energy requirements and safety glazing rules. Compliance is arranged through a competent person scheme installer or your council's Building Control, and the certificate is kept with your property records.
Finishes and extras for uPVC sliding patio doors
- Trims and cills. A matching uPVC cill, add-on trims and internal finishing so the new door sits neatly against existing plaster and brick.
- Glass. Toughened double glazing as standard, with laminated, obscure or solar-control units available.
- Handles. Lever or pull handles in white, black, chrome or gold-effect finishes, with a key lock on the outside.
Questions about uPVC sliding patio doors in Tenby
How soon can you survey in Tenby?
Surveys in the SA70 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks from survey sign-off.
How quickly can a uPVC patio door be fitted?
A uPVC sliding patio door is typically made in 2–4 weeks after you sign off the surveyed specification, the shortest lead time of the sliding door materials. A straight swap in the same opening typically takes 1 day, including removing the old door, fitting, sealing and making good inside. Times are typical rather than promised, and foiled colours can add a little time.
Are uPVC sliding doors secure?
uPVC sliding doors are secure when the sliding panel has multi-point locking, anti-lift protection and steel reinforcement in the frame. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets. Laminated glass adds resistance to breaking through, and a key-locking handle stops the door being opened from inside if a pane is broken.
How do I maintain a uPVC sliding door?
A uPVC sliding door needs only light maintenance: wipe the frames with warm soapy water, avoid abrasive cleaners that dull the surface, and vacuum the track so grit does not wear the rollers. Lubricate the lock keeps and handle mechanism once a year. If the panel drags, the rollers can usually be adjusted rather than replaced. Check the drainage slots in the outer frame after autumn leaf fall, as blocked slots let water sit in the track.