- Postcode district
- NW3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- West Hampstead, Golders Green, Kentish Town
- Building rules
- England
Are sliding doors for new openings right for your Hampstead home?
Before you settle on a door type, it helps to know what sliding doors for new openings do well and what to check before you order.
If your Hampstead home is semi-detached or terraced and the new steel would sit on the shared wall, budget time for party wall notices before work starts.
Living in a Hampstead flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
Daylight in Hampstead and what it means for your glass
At the latitude of Hampstead, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 49 min against 16 h 39 min in midsummer. A south-facing sliding door for a new opening lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
What should you budget for sliding doors for new openings in Hampstead?
These figures combine an aluminium sliding door with the building work to form or widen the opening, including structural calculations and VAT. Your price is fixed in a written quote once the wall in your Hampstead home has been surveyed; council fees are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £6,595–£7,295 |
| 2.1 m | 2 panels | £7,495–£8,295 |
| 2.4 m | 2 panels | £7,895–£8,895 |
See every size on the sliding doors for new openings page or try the guide price tool.
What happens when you order sliding doors for new openings in Hampstead?
A surveyor visits your Hampstead home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals — and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Hampstead?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Options to consider for your sliding door for a new opening
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
Questions about sliding doors for new openings in Hampstead
Is the price different in Hampstead?
No. Guide prices for sliding doors for new openings are the same across mainland Britain, including Hampstead. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.