- Postcode district
- NW4
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Golders Green, Finchley, Mill Hill
- Building rules
- England
New and widened openings for sliding doors in Hendon: what to know
Most homeowners choosing sliding doors for new openings want the same things: more light, a clear view and a door that is easy to live with.
Where a Hendon house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
Living in a Hendon flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
Planning glass for the light in Hendon
Daylight in Hendon runs from about 7 h 49 min in December to 16 h 39 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
New and widened openings for sliding doors prices in Hendon
Use these guide prices to budget for the whole job in Hendon: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,895–£8,895 |
| 3.0 m | 2 panels | £8,795–£9,895 |
| 4.8 m | 4 panels | £11,495–£12,995 |
See every size on the sliding doors for new openings page or try the guide price tool.
Survey, manufacture and fitting around Hendon
Surveys in the NW4 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Rules for sliding doors for new openings in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Finishes and extras for sliding doors for new openings
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
Questions about sliding doors for new openings in Hendon
Do you fit sliding doors for new openings in Hendon?
Yes. We survey and fit sliding doors for new openings in Hendon and across Greater London, including nearby Golders Green and Finchley. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much does it cost to widen an opening for sliding doors?
Our guide price for forming or widening an opening is £3,595 for 2.4 m and £4,495 for 4.8 m, covering steel, padstones, making good and structural calculations. The door is priced separately, and Building Control fees are set by your council. All figures are guide prices inc VAT, fixed in a written quote after we survey the wall and see what is above it.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.