- Postcode district
- SE13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Blackheath, Catford, Greenwich
- Building rules
- England
New and widened openings for sliding doors in Lewisham: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
For homes in Lewisham that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
Living in a Lewisham flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
How much sun will a door in Lewisham get?
Daylight in Lewisham runs from about 7 h 50 min in December to 16 h 38 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do sliding doors for new openings cost in Lewisham?
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 3 panels | £9,695–£10,895 |
| 4.0 m | 3 panels | £10,295–£11,595 |
| 4.8 m | 4 panels | £11,495–£12,995 |
See every size on the sliding doors for new openings page or try the guide price tool.
Survey, manufacture and fitting around Lewisham
Surveys in the SE13 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Lewisham?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Which options matter for sliding doors for new openings?
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
Questions about sliding doors for new openings in Lewisham
Do you fit sliding doors for new openings in Lewisham?
Yes. We survey and fit sliding doors for new openings in Lewisham and across Greater London, including nearby Blackheath and Catford. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Do I need building regulations to widen a door opening?
Yes, forming or widening an opening is structural work and needs a Building Regulations application in England, supported by structural calculations. Building Control inspects the work, typically including the steel and its bearings. In Scotland a building warrant is needed. Wales and Northern Ireland follow their own building regulations through local authority or district council building control.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.