- Postcode district
- CT14
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Sandwich, Dover, Ramsgate
- Building rules
- England
What sliding doors for new openings offer homes in Deal
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
For homes in Deal that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
If your Deal home is semi-detached or terraced and the new steel would sit on the shared wall, budget time for party wall notices before work starts.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
How much sun will a door in Deal get?
Because Deal sees long summer days (about 16 h 35 min) and short winter ones (about 7 h 52 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for sliding doors for new openings in Deal
Use these guide prices to budget for the whole job in Deal: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £6,595–£7,295 |
| 1.8 m | 2 panels | £6,995–£7,795 |
| 2.4 m | 2 panels | £7,895–£8,895 |
See every size on the sliding doors for new openings page or try the guide price tool.
Timescales for sliding doors for new openings in Deal
A surveyor visits your Deal home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals — and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Deal?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for sliding doors for new openings
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
Questions about sliding doors for new openings in Deal
How soon can you survey in Deal?
Surveys in the CT14 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals.
Do I need building regulations to widen a door opening?
Yes, forming or widening an opening is structural work and needs a Building Regulations application in England, supported by structural calculations. Building Control inspects the work, typically including the steel and its bearings. In Scotland a building warrant is needed. Wales and Northern Ireland follow their own building regulations through local authority or district council building control.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Do I need planning permission for a new opening?
Planning rules for altering an elevation depend on the property and where you are, so it is worth checking with your council before you commit. Flats, listed buildings and properties covered by an Article 4 direction are the most likely to need consent. Wales and Scotland have their own planning rules. Our planning guide sets out the questions to ask.