- Postcode district
- CT20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Hythe, Dover, Ashford
- Building rules
- England
Are sliding doors for new openings right for your Folkestone home?
A few practical points decide whether sliding doors for new openings suit a particular room and opening:
Where a Folkestone house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
Turning a Folkestone kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
- Structural calculations are included in the guide price, and the Building Regulations application is handled as part of the project, so you are not left coordinating engineers and inspectors.
Light and sun in Folkestone
At the latitude of Folkestone, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 54 min against 16 h 34 min in midsummer. A south-facing sliding door for a new opening lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for sliding doors for new openings in Folkestone
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,795–£9,895 |
| 3.6 m | 3 panels | £9,695–£10,895 |
| 4.8 m | 4 panels | £11,495–£12,995 |
See every size on the sliding doors for new openings page or try the guide price tool.
How fitting works in Folkestone
A surveyor visits your Folkestone home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals — and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Folkestone?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Which options matter for sliding doors for new openings?
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
Questions about sliding doors for new openings in Folkestone
Is the price different in Folkestone?
No. Guide prices for sliding doors for new openings are the same across mainland Britain, including Folkestone. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.