- Postcode district
- CT20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Hythe, Dover, Ashford
- Building rules
- England
What sliding doors for extensions offer homes in Folkestone
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
When your Folkestone extension is going through Building Control, keep the energy information for the doors to hand, as the inspector may ask for it.
Where an extension in Folkestone faces south or west, ask about solar-control glass, because a wall of glass in a single-storey room can overheat in summer.
- Garden rooms benefit from the same approach, with a door sized to the frame and a header designed to carry the roof without pressing down on the door.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- Slimline aluminium systems with interlocks typically around 20–25 mm maximise the glass in a new rear wall, keeping the view as open as possible.
Sunlight, glass and orientation in Folkestone
Because Folkestone sees long summer days (about 16 h 34 min) and short winter ones (about 7 h 54 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Typical costs for sliding doors for extensions around Folkestone
Guide prices are the same across Kent. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £5,995–£7,295 |
| 4.0 m | 3 panels | £8,395–£10,195 |
| 4.8 m | 3 panels | £9,595–£11,695 |
See every size on the sliding doors for extensions page or try the guide price tool.
From survey to fitted door in Folkestone
A surveyor visits your Folkestone home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks for slimline systems after check survey sign-off — and fitting usually takes 1–2 days, scheduled to the build programme.
Do you need approval in Folkestone?
In England, sliding doors in a new extension are covered by the extension's own Building Regulations application rather than a separate door notification. Approved Document L limits the glazed area: windows, roof windows and doors should not normally exceed 25% of the extension's floor area plus the area of any windows or doors lost to the extension, unless the extra glass is compensated for elsewhere. The doors must also meet the energy and safety glazing standards.
Finishes and extras for sliding doors for extensions
- Three or four panels. More panels for wider extension openings, with one or more sliding.
- Solar-control glass. Coated glass for south- and west-facing extensions prone to summer overheating.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
Questions about sliding doors for extensions in Folkestone
Is the price different in Folkestone?
No. Guide prices for sliding doors for extensions are the same across mainland Britain, including Folkestone. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.
Can you work with my builder and architect?
Yes, working with your builder, architect and structural engineer is the normal way we approach extension doors. We can provide technical details, opening sizes, threshold requirements and fixing information, and attend site for the check survey. Your builder forms the opening and prepares the floor, and our installers fit the doors to the agreed programme.