- Postcode district
- ME1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Strood, Gillingham, Gravesend
- Building rules
- England
Are sliding doors for new openings right for your Rochester home?
Most homeowners choosing sliding doors for new openings want the same things: more light, a clear view and a door that is easy to live with.
Thinking about a wider opening in Rochester but unsure of the size? Mark it out on the wall inside and out with tape, then picture the furniture and the view before you decide.
If your Rochester home is semi-detached or terraced and the new steel would sit on the shared wall, budget time for party wall notices before work starts.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
How much sun will a door in Rochester get?
At the latitude of Rochester, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 51 min against 16 h 37 min in midsummer. A south-facing sliding door for a new opening lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
What should you budget for sliding doors for new openings in Rochester?
These figures combine an aluminium sliding door with the building work to form or widen the opening, including structural calculations and VAT. Your price is fixed in a written quote once the wall in your Rochester home has been surveyed; council fees are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £6,595–£7,295 |
| 4.0 m | 3 panels | £10,295–£11,595 |
| 4.8 m | 4 panels | £11,495–£12,995 |
See every size on the sliding doors for new openings page or try the guide price tool.
Timescales for sliding doors for new openings in Rochester
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals), and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door. If you are in Strood or Gillingham, the same process and prices apply.
Do you need approval in Rochester?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Specification choices for sliding doors for new openings in Rochester
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
Questions about sliding doors for new openings in Rochester
How soon can you survey in Rochester?
Surveys in the ME1 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.