- Postcode district
- ME2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Rochester, Gillingham, Gravesend
- Building rules
- England
New and widened openings for sliding doors in Strood: what to know
Before you settle on a door type, it helps to know what sliding doors for new openings do well and what to check before you order.
Living in a Strood flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
Thinking about a wider opening in Strood but unsure of the size? Mark it out on the wall inside and out with tape, then picture the furniture and the view before you decide.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
How much sun will a door in Strood get?
Sun angles matter for big glazed doors. Around Strood, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Typical costs for sliding doors for new openings around Strood
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,895–£8,895 |
| 3.0 m | 2 panels | £8,795–£9,895 |
| 4.8 m | 4 panels | £11,495–£12,995 |
See every size on the sliding doors for new openings page or try the guide price tool.
Survey, manufacture and fitting around Strood
Surveys in the ME2 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Strood?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Specification choices for sliding doors for new openings in Strood
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
Questions about sliding doors for new openings in Strood
Do you fit sliding doors for new openings in Strood?
Yes. We survey and fit sliding doors for new openings in Strood and across Kent, including nearby Rochester and Gillingham. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
How much does it cost to widen an opening for sliding doors?
Our guide price for forming or widening an opening is £3,595 for 2.4 m and £4,495 for 4.8 m, covering steel, padstones, making good and structural calculations. The door is priced separately, and Building Control fees are set by your council. All figures are guide prices inc VAT, fixed in a written quote after we survey the wall and see what is above it.