- Postcode district
- SY1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Church Stretton, Telford, Oswestry
- Building rules
- England
Is a sliding door for a new opening a good fit for your home in Shrewsbury?
Before you settle on a door type, it helps to know what sliding doors for new openings do well and what to check before you order.
Living in a Shrewsbury flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
Where a Shrewsbury house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
- Widening a standard patio opening to a larger span can transform how a room connects to the garden, giving a wall of glass rather than a doorway.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
Sunlight, glass and orientation in Shrewsbury
Sun angles matter for big glazed doors. Around Shrewsbury, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for sliding doors for new openings in Shrewsbury?
Use these guide prices to budget for the whole job in Shrewsbury: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,795–£9,895 |
| 3.6 m | 3 panels | £9,695–£10,895 |
| 4.0 m | 3 panels | £10,295–£11,595 |
See every size on the sliding doors for new openings page or try the guide price tool.
From survey to fitted door in Shrewsbury
Surveys in the SY1 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Rules for sliding doors for new openings in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for sliding doors for new openings
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
Questions about sliding doors for new openings in Shrewsbury
Is the price different in Shrewsbury?
No. Guide prices for sliding doors for new openings are the same across mainland Britain, including Shrewsbury. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Do I need building regulations to widen a door opening?
Yes, forming or widening an opening is structural work and needs a Building Regulations application in England, supported by structural calculations. Building Control inspects the work, typically including the steel and its bearings. In Scotland a building warrant is needed. Wales and Northern Ireland follow their own building regulations through local authority or district council building control.