- Postcode district
- AB32
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Aberdeen, Portlethen, Inverurie
- Building rules
- Scotland
Is an external pocket sliding door a good fit for your home in Westhill?
The right door depends on the opening, the room and the way you use the garden. Here is how external pocket sliding doors tend to work out in practice:
Solid brick, cavity block or timber frame: the way your Westhill wall is built decides how the pocket is formed, which is why the survey looks at it closely.
If the wall beside your Westhill patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
Sunlight, glass and orientation in Westhill
In Westhill the shortest day has roughly 6 h 40 min of daylight and the longest about 17 h 56 min. The noon sun sits near 9° above the horizon in winter and 56° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Guide prices for external pocket sliding doors in Westhill
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 1 panel | £7,095–£8,595 |
| 4.0 m | 2 panels | £9,895–£12,095 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Westhill
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks from survey sign-off), and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. If you are in Aberdeen or Portlethen, the same process and prices apply.
Do you need approval in Westhill?
In Scotland, forming or widening an opening needs a building warrant before work starts, with structural details for the new beam. The door must meet the Scottish building standards for energy and safety glazing.
Finishes and extras for external pocket sliding doors
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
Questions about external pocket sliding doors in Westhill
Do you fit external pocket sliding doors in Westhill?
Yes. We survey and fit external pocket sliding doors in Westhill and across Aberdeenshire and Moray, including nearby Aberdeen and Portlethen. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.