External pocket sliding doors across Aberdeenshire and Moray
Most homeowners choosing external pocket sliding doors want the same things: more light, a clear view and a door that is easy to live with.
For an Aberdeenshire and Moray extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
Solid brick, cavity block or timber frame: the way your Aberdeenshire and Moray wall is built decides how the pocket is formed, which is why the survey looks at it closely.
- A removable access panel on the inside of the pocket wall lets the rollers be reached and adjusted without opening up the plaster.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
Guide prices for external pocket sliding doors in Aberdeenshire and Moray
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 1 panel | £6,595–£8,095 |
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 4.0 m | 2 panels | £9,895–£12,095 |
Every size is on the external pocket sliding doors page.
Daylight and glass in Aberdeenshire and Moray
Daylight in Aberdeenshire and Moray runs from about 6 h 37 min in December to 18 h 00 min in June, with the noon sun at roughly 9° and 56° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Towns we cover in Aberdeenshire and Moray
We survey and fit external pocket sliding doors in 14 towns across Aberdeenshire and Moray, including the AB11, AB12, AB31, AB32, AB39, AB41 postcode districts.
Approvals in Scotland
A new opening in Scotland is warrant work: the council needs structural information for the beam and opening before building starts, and the finished door must meet the Scottish standards.
Questions about external pocket sliding doors in Aberdeenshire and Moray
Can you match other doors and windows in my Aberdeenshire and Moray home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
How much do external pocket sliding doors cost?
External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.