- Postcode district
- CH5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Deeside, Flint, Buckley
- Building rules
- Wales
Are external pocket sliding doors right for your Connah's Quay home?
Before you settle on a door type, it helps to know what external pocket sliding doors do well and what to check before you order.
Solid brick, cavity block or timber frame: the way your Connah's Quay wall is built decides how the pocket is formed, which is why the survey looks at it closely.
For a Connah's Quay extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
How much sun will a door in Connah's Quay get?
Daylight in Connah's Quay runs from about 7 h 31 min in December to 16 h 59 min in June, with the noon sun at roughly 13° and 60° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for external pocket sliding doors in Connah's Quay
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,395–£10,295 |
| 4.0 m | 2 panels | £9,895–£12,095 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
Timescales for external pocket sliding doors in Connah's Quay
Here is the usual sequence in Connah's Quay: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Deeside, Flint and Buckley.
Do you need approval in Connah's Quay?
Widening an opening in Wales means a Building Regulations application for the structural work, calculations for the beam, and a door that meets Approved Document L (Wales). Party wall notices may be needed in semi-detached and terraced homes.
Specification choices for external pocket sliding doors in Connah's Quay
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
Questions about external pocket sliding doors in Connah's Quay
Is the price different in Connah's Quay?
No. Guide prices for external pocket sliding doors are the same across mainland Britain, including Connah's Quay. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.