- Postcode district
- SA61
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Milford Haven, Pembroke Dock, Fishguard
- Building rules
- Wales
Why choose external pocket sliding doors in Haverfordwest?
Here is what to weigh up if you are considering external pocket sliding doors for a home in Haverfordwest:
For a Haverfordwest extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
If the only wall beside your Haverfordwest opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
- Insulating the pocket wall and sealing the panel edges limits heat loss through the cavity, helping the wall beside the door perform like the rest of the house.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
Planning glass for the light in Haverfordwest
The midday sun over Haverfordwest ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
External pocket sliding doors prices in Haverfordwest
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
Timescales for external pocket sliding doors in Haverfordwest
Here is the usual sequence in Haverfordwest: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Milford Haven, Pembroke Dock and Fishguard.
Do you need approval in Haverfordwest?
In Wales, structural work to form or widen an opening needs Building Regulations approval and structural calculations, and the new door must meet the Welsh energy and safety glazing requirements. The Party Wall etc. Act 1996 may apply where steelwork bears on a party wall.
Which options matter for external pocket sliding doors?
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
Questions about external pocket sliding doors in Haverfordwest
Do you fit external pocket sliding doors in Haverfordwest?
Yes. We survey and fit external pocket sliding doors in Haverfordwest and across Dyfed, including nearby Milford Haven and Pembroke Dock. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.