- Postcode district
- CO1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Coggeshall, Halstead, Sudbury
- Building rules
- England
What external pocket sliding doors offer homes in Colchester
Most homeowners choosing external pocket sliding doors want the same things: more light, a clear view and a door that is easy to live with.
Want the whole width of your Colchester kitchen open to the garden but prefer the look of sliders to bifolds? A pocket gives you both, at the cost of more building work.
If the wall beside your Colchester patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
Daylight in Colchester and what it means for your glass
At the latitude of Colchester, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 46 min against 16 h 43 min in midsummer. A south-facing external pocket sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Typical costs for external pocket sliding doors around Colchester
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.6 m | 2 panels | £9,295–£11,395 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Colchester
Surveys in the CO1 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Do you need approval in Colchester?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Choosing the specification
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
Questions about external pocket sliding doors in Colchester
How soon can you survey in Colchester?
Surveys in the CO1 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.