Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
External pocket sliding doors
External pocket sliding doors · England

External pocket sliding doors in Essex

We supply and fit external pocket sliding doors in Essex and the surrounding SS1 area. Start with a guide price online, then a surveyor measures the opening and confirms the specification before you commit.

Are external pocket sliding doors right for homes in Essex?

Here is what to weigh up if you are considering external pocket sliding doors for a home in Essex:

For an Essex extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.

If the only wall beside your Essex opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.

  • Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
  • When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
  • With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.

Guide prices for external pocket sliding doors in Essex

These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.

Guide prices for external pocket sliding doors in Essex
Overall widthTypical panelsGuide price (fitted, inc VAT)
1.8 m1 panel£6,595–£8,095
2.4 m2 panels£7,495–£9,195
4.8 m3 panels£11,095–£13,595
6.0 m3 panels£12,895–£15,795

Every size is on the external pocket sliding doors page.

Daylight and glass in Essex

June 62°Dec 15°

At the latitude of Essex, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 47 min against 16 h 41 min in midsummer. A south-facing external pocket sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.

Towns we cover in Essex

We survey and fit external pocket sliding doors in 22 towns across Essex, including the CB10, CM0, CM1, CM12, CM20, CM6 postcode districts.

Approvals in England

In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.

Questions about external pocket sliding doors in Essex

Is the price different in Essex?

No. Guide prices for external pocket sliding doors are the same across mainland Britain, including Essex. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.

How much do external pocket sliding doors cost?

External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.

Do external pocket doors need Building Regulations approval?

External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.

Are external pocket doors secure?

External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.

External pocket sliding doors in neighbouring areas

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote