- Postcode district
- CM0
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Southend-on-Sea, Maldon, Rayleigh
- Building rules
- England
Are external pocket sliding doors right for your Burnham-on-Crouch home?
Most homeowners choosing external pocket sliding doors want the same things: more light, a clear view and a door that is easy to live with.
If the wall beside your Burnham-on-Crouch patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
For a Burnham-on-Crouch extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
- A removable access panel on the inside of the pocket wall lets the rollers be reached and adjusted without opening up the plaster.
Light and sun in Burnham-on-Crouch
In Burnham-on-Crouch the shortest day has roughly 7 h 48 min of daylight and the longest about 16 h 40 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Typical costs for external pocket sliding doors around Burnham-on-Crouch
Pricing does not change because you are in Burnham-on-Crouch: the ranges below include fitting, structural calculations and VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 1 panel | £6,595–£8,095 |
| 2.1 m | 1 panel | £7,095–£8,595 |
| 4.0 m | 2 panels | £9,895–£12,095 |
See every size on the external pocket sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Burnham-on-Crouch
Here is the usual sequence in Burnham-on-Crouch: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Southend-on-Sea, Maldon and Rayleigh.
Do you need approval in Burnham-on-Crouch?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Choosing the specification
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
Questions about external pocket sliding doors in Burnham-on-Crouch
Do you fit external pocket sliding doors in Burnham-on-Crouch?
Yes. We survey and fit external pocket sliding doors in Burnham-on-Crouch and across Essex, including nearby Southend-on-Sea and Maldon. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.