- Postcode district
- CM0
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Southend-on-Sea, Maldon, Rayleigh
- Building rules
- England
Is a tilt and slide door a good fit for your home in Burnham-on-Crouch?
These are the points a surveyor will go through with you when you choose tilt and slide doors for a home in Burnham-on-Crouch:
Where an old patio door in Burnham-on-Crouch rattles or lets in draughts, a sash that seals on all four edges is a practical fix that keeps the same opening.
A kitchen in Burnham-on-Crouch that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
- When closed, the sash is drawn back into the frame and presses onto gaskets on all four edges, giving a window-like seal against draughts and driving rain.
- The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
Planning glass for the light in Burnham-on-Crouch
Because Burnham-on-Crouch sees long summer days (about 16 h 40 min) and short winter ones (about 7 h 48 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do tilt and slide doors cost in Burnham-on-Crouch?
Pricing is transparent and does not change because you are in Burnham-on-Crouch. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £1,995–£2,495 |
| 1.8 m | 2 panels | £2,195–£2,695 |
| 3.0 m | 2 panels | £2,995–£3,595 |
See every size on the tilt and slide doors page or try the guide price tool.
Survey, manufacture and fitting around Burnham-on-Crouch
We plan the job around your home in Burnham-on-Crouch: survey first, then a written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). The fitting itself usually takes 1 day for a straight swap in an existing opening. If you are in Southend-on-Sea or Maldon, the same process and prices apply.
Do you need approval in Burnham-on-Crouch?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Finishes and extras for tilt and slide doors
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Colours. White, woodgrain or coloured foils on uPVC; standard or RAL powder coats on aluminium.
- Sash side. A left or right opening sash, chosen to suit furniture, the patio layout and the way you walk out.
Questions about tilt and slide doors in Burnham-on-Crouch
Is the price different in Burnham-on-Crouch?
No. Guide prices for tilt and slide doors are the same across mainland Britain, including Burnham-on-Crouch. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How much does a tilt and slide patio door cost?
Tilt and slide patio doors start from a guide price of £1,995 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.1 m door is a guide £2,395–£2,895, and a 3 m door is around £2,995. Aluminium frames, colour and triple glazing move the figure up, and the final price is fixed in a written quote after survey.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.