External pocket sliding doors across Kent
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Kent:
Solid brick, cavity block or timber frame: the way your Kent wall is built decides how the pocket is formed, which is why the survey looks at it closely.
If the only wall beside your Kent opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- Insulating the pocket wall and sealing the panel edges limits heat loss through the cavity, helping the wall beside the door perform like the rest of the house.
Guide prices for external pocket sliding doors in Kent
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 1 panel | £7,095–£8,595 |
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 3.6 m | 2 panels | £9,295–£11,395 |
Every size is on the external pocket sliding doors page.
Daylight and glass in Kent
Sun angles matter for big glazed doors. Around Kent, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Towns we cover in Kent
We survey and fit external pocket sliding doors in 24 towns across Kent, including the CT1, CT10, CT11, CT13, CT14, CT16 postcode districts.
Approvals in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Questions about external pocket sliding doors in Kent
Can you match other doors and windows in my Kent home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.
How long does an external pocket door project take?
An external pocket door typically takes 6–8 weeks to make after survey sign-off, and the building work to form the opening and pocket typically takes 3–5 days before the door goes in. Fitting the door then takes 1–2 days. Engineer design and Building Regulations approval come first, so the whole project runs longer than a straight door swap.