- Postcode district
- TN1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Tonbridge, Crowborough, Sevenoaks
- Building rules
- England
Why choose external pocket sliding doors in Royal Tunbridge Wells?
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Royal Tunbridge Wells:
However sheltered or exposed your Royal Tunbridge Wells home is, external pocket sliding doors need a drained pocket and a clear external channel so rainwater running along the track never sits inside the wall.
Solid brick, cavity block or timber frame: the way your Royal Tunbridge Wells wall is built decides how the pocket is formed, which is why the survey looks at it closely.
- A removable access panel on the inside of the pocket wall lets the rollers be reached and adjusted without opening up the plaster.
- Insulating the pocket wall and sealing the panel edges limits heat loss through the cavity, helping the wall beside the door perform like the rest of the house.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
Sunlight, glass and orientation in Royal Tunbridge Wells
The midday sun over Royal Tunbridge Wells ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Guide prices for external pocket sliding doors in Royal Tunbridge Wells
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 1 panel | £7,095–£8,595 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
What happens when you order external pocket sliding doors in Royal Tunbridge Wells?
A surveyor visits your Royal Tunbridge Wells home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks from survey sign-off — and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Do you need approval in Royal Tunbridge Wells?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Specification choices for external pocket sliding doors in Royal Tunbridge Wells
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
Questions about external pocket sliding doors in Royal Tunbridge Wells
Is the price different in Royal Tunbridge Wells?
No. Guide prices for external pocket sliding doors are the same across mainland Britain, including Royal Tunbridge Wells. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.
How much do external pocket sliding doors cost?
External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.