- Postcode district
- SW3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Battersea, Kensington, Fulham
- Building rules
- England
What external pocket sliding doors offer homes in Chelsea
Here is what to weigh up if you are considering external pocket sliding doors for a home in Chelsea:
Solid brick, cavity block or timber frame: the way your Chelsea wall is built decides how the pocket is formed, which is why the survey looks at it closely.
However sheltered or exposed your Chelsea home is, external pocket sliding doors need a drained pocket and a clear external channel so rainwater running along the track never sits inside the wall.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
How much sun will a door in Chelsea get?
Sun angles matter for big glazed doors. Around Chelsea, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
What should you budget for external pocket sliding doors in Chelsea?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 1 panel | £7,095–£8,595 |
| 4.8 m | 3 panels | £11,095–£13,595 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Chelsea
Surveys in the SW3 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Rules for external pocket sliding doors in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Finishes and extras for external pocket sliding doors
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
Questions about external pocket sliding doors in Chelsea
How soon can you survey in Chelsea?
Surveys in the SW3 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.
Does a pocket in the wall cause heat loss?
A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.