- Postcode district
- SW11
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Chelsea, Wandsworth, Fulham
- Building rules
- England
Why choose external pocket sliding doors in Battersea?
Here is what to weigh up if you are considering external pocket sliding doors for a home in Battersea:
If the only wall beside your Battersea opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.
However sheltered or exposed your Battersea home is, external pocket sliding doors need a drained pocket and a clear external channel so rainwater running along the track never sits inside the wall.
- Insulating the pocket wall and sealing the panel edges limits heat loss through the cavity, helping the wall beside the door perform like the rest of the house.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
Planning glass for the light in Battersea
Because Battersea sees long summer days (about 16 h 38 min) and short winter ones (about 7 h 50 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for external pocket sliding doors in Battersea
Pricing does not change because you are in Battersea: the ranges below include fitting, structural calculations and VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,395–£10,295 |
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Battersea
Here is the usual sequence in Battersea: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Chelsea, Wandsworth and Fulham.
Rules for external pocket sliding doors in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Specification choices for external pocket sliding doors in Battersea
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
Questions about external pocket sliding doors in Battersea
Do I need building approval for external pocket sliding doors in Battersea?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How much do external pocket sliding doors cost?
External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.
Does a pocket in the wall cause heat loss?
A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.