- Postcode district
- SO51
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Totton, Eastleigh, Southampton
- Building rules
- England
External pocket sliding doors in Romsey: what to know
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Romsey:
Want the whole width of your Romsey kitchen open to the garden but prefer the look of sliders to bifolds? A pocket gives you both, at the cost of more building work.
For a Romsey extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
- With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- Insulating the pocket wall and sealing the panel edges limits heat loss through the cavity, helping the wall beside the door perform like the rest of the house.
How much sun will a door in Romsey get?
At the latitude of Romsey, the midday sun climbs to about 62° in late June but only about 16° in late December, when daylight lasts around 7 h 55 min against 16 h 33 min in midsummer. A south-facing external pocket sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
External pocket sliding doors prices in Romsey
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 1 panel | £6,595–£8,095 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 4.8 m | 3 panels | £11,095–£13,595 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Romsey
Here is the usual sequence in Romsey: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Totton, Eastleigh and Southampton.
Do you need approval in Romsey?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Which options matter for external pocket sliding doors?
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
Questions about external pocket sliding doors in Romsey
Do you fit external pocket sliding doors in Romsey?
Yes. We survey and fit external pocket sliding doors in Romsey and across Hampshire, including nearby Totton and Eastleigh. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.
Does a pocket in the wall cause heat loss?
A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.