Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
External pocket sliding doors
External pocket sliding doors · HR9

External pocket sliding doors in Ross-on-Wye

Planning external pocket sliding doors for a home in Ross-on-Wye? We measure, make and fit to your opening across Herefordshire, with Building Regulations compliance arranged and the certificate sent to you.

Postcode district
HR9
Survey
Free for new and replacement doors
Typical lead time
Typically 6–8 weeks from survey sign-off
Guide price
From £6,595 inc VAT
Nearby
Monmouth, Ledbury, Hereford
Building rules
England

What external pocket sliding doors offer homes in Ross-on-Wye

The right door depends on the opening, the room and the way you use the garden. Here is how external pocket sliding doors tend to work out in practice:

If the only wall beside your Ross-on-Wye opening is shared with a neighbour, check the pocket design and any steel bearing on it early, as the Party Wall etc. Act 1996 (England and Wales) may apply.

If the wall beside your Ross-on-Wye patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.

  • Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
  • A removable access panel on the inside of the pocket wall lets the rollers be reached and adjusted without opening up the plaster.
  • Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.

Planning glass for the light in Ross-on-Wye

June 62°Dec 15°

Daylight in Ross-on-Wye runs from about 7 h 45 min in December to 16 h 43 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.

Typical costs for external pocket sliding doors around Ross-on-Wye

These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.

Typical costs for external pocket sliding doors around Ross-on-Wye
Overall widthTypical panelsGuide price (fitted, inc VAT)
3.0 m2 panels£8,395–£10,295
3.6 m2 panels£9,295–£11,395
6.0 m3 panels£12,895–£15,795

See every size on the external pocket sliding doors page or try the guide price tool.

From survey to fitted door in Ross-on-Wye

Here is the usual sequence in Ross-on-Wye: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Monmouth, Ledbury and Hereford.

Rules for external pocket sliding doors in England

A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.

Finishes and extras for external pocket sliding doors

  • Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
  • System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
  • Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.

Questions about external pocket sliding doors in Ross-on-Wye

Can you match other doors and windows in my Ross-on-Wye home?

Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.

Are external pocket doors secure?

External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.

How much do external pocket sliding doors cost?

External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.

Does a pocket in the wall cause heat loss?

A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote