- Postcode district
- WR8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Tewkesbury, Malvern, Pershore
- Building rules
- England
What external pocket sliding doors offer homes in Upton-upon-Severn
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Upton-upon-Severn:
For an Upton-upon-Severn extension still at the drawing stage, planning the pocket wall now is far simpler than rebuilding a finished wall later.
Want the whole width of your Upton-upon-Severn kitchen open to the garden but prefer the look of sliders to bifolds? A pocket gives you both, at the cost of more building work.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
Planning glass for the light in Upton-upon-Severn
At the latitude of Upton-upon-Severn, the midday sun climbs to about 61° in late June but only about 14° in late December, when daylight lasts around 7 h 44 min against 16 h 45 min in midsummer. A south-facing external pocket sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
What should you budget for external pocket sliding doors in Upton-upon-Severn?
Pricing does not change because you are in Upton-upon-Severn: the ranges below include fitting, structural calculations and VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,395–£10,295 |
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.0 m | 2 panels | £9,895–£12,095 |
See every size on the external pocket sliding doors page or try the guide price tool.
How fitting works in Upton-upon-Severn
Here is the usual sequence in Upton-upon-Severn: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Tewkesbury, Malvern and Pershore.
Do you need approval in Upton-upon-Severn?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Options to consider for your external pocket sliding door
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- Colours. Single or dual colour powder coating, so the exposed edge of the panel matches the frame inside and out.
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
Questions about external pocket sliding doors in Upton-upon-Severn
Do I need building approval for external pocket sliding doors in Upton-upon-Severn?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
Are external pocket doors secure?
External pocket doors are secure when the panels lock to the frame with multi-point hardware, the glass is laminated, and the pocket is closed off so the panels cannot be reached from outside. Once shut, the front edge of the panel locks into the frame just as on a standard slider. Systems are available tested to PAS 24, and the locking specification is set out in your quote.