Are external pocket sliding doors right for homes in Worcestershire?
The right door depends on the opening, the room and the way you use the garden. Here is how external pocket sliding doors tend to work out in practice:
Solid brick, cavity block or timber frame: the way your Worcestershire wall is built decides how the pocket is formed, which is why the survey looks at it closely.
However sheltered or exposed your Worcestershire home is, external pocket sliding doors need a drained pocket and a clear external channel so rainwater running along the track never sits inside the wall.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
Guide prices for external pocket sliding doors in Worcestershire
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 1 panel | £6,595–£8,095 |
| 2.1 m | 1 panel | £7,095–£8,595 |
| 3.6 m | 2 panels | £9,295–£11,395 |
| 4.0 m | 2 panels | £9,895–£12,095 |
Every size is on the external pocket sliding doors page.
Daylight and glass in Worcestershire
Because Worcestershire sees long summer days (about 16 h 47 min) and short winter ones (about 7 h 42 min), the elevation your door faces makes a real difference. With the midday sun at about 14° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Towns we cover in Worcestershire
We survey and fit external pocket sliding doors in 11 towns across Worcestershire, including the B61, B97, DY10, DY13, WR1, WR10 postcode districts.
Approvals in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Questions about external pocket sliding doors in Worcestershire
Do you fit external pocket sliding doors in Worcestershire?
Yes. We survey and fit external pocket sliding doors in Worcestershire and across Worcestershire, including Worcester and Redditch. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much do external pocket sliding doors cost?
External pocket sliding doors start from a guide price of £6,595 for a 1.8 m single-panel door, fitted, inc VAT, at standard 2.1 m height, including forming the wall pocket. A 3 m two-panel door is a guide £8,395–£10,295, and a 6 m three-panel door is around £12,895. Wall construction, glass and finish affect the figure, which is fixed in a written quote after survey.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.
Does a pocket in the wall cause heat loss?
A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.