Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
External pocket sliding doors
External pocket sliding doors · England

External pocket sliding doors in the West Midlands

Planning external pocket sliding doors for a home in West Midlands? We measure, make and fit to your opening across the West Midlands, with Building Regulations compliance arranged and the certificate sent to you.

Are external pocket sliding doors right for homes in the West Midlands?

Here is what to weigh up if you are considering external pocket sliding doors for a home in West Midlands:

However sheltered or exposed your West Midlands home is, external pocket sliding doors need a drained pocket and a clear external channel so rainwater running along the track never sits inside the wall.

Want the whole width of your West Midlands kitchen open to the garden but prefer the look of sliders to bifolds? A pocket gives you both, at the cost of more building work.

  • With every panel slid into the wall, the full width of the opening is clear, so the room and terrace join without a fixed panel in the way.
  • Insulating the pocket wall and sealing the panel edges limits heat loss through the cavity, helping the wall beside the door perform like the rest of the house.
  • A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.

Guide prices for external pocket sliding doors in the West Midlands

These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.

Guide prices for external pocket sliding doors in the West Midlands
Overall widthTypical panelsGuide price (fitted, inc VAT)
3.0 m2 panels£8,395–£10,295
3.6 m2 panels£9,295–£11,395
4.8 m3 panels£11,095–£13,595
6.0 m3 panels£12,895–£15,795

Every size is on the external pocket sliding doors page.

Daylight and glass in the West Midlands

June 61°Dec 14°

At the latitude of the West Midlands, the midday sun climbs to about 61° in late June but only about 14° in late December, when daylight lasts around 7 h 39 min against 16 h 50 min in midsummer. A south-facing external pocket sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.

Towns we cover in the West Midlands

We survey and fit external pocket sliding doors in 28 towns across the West Midlands, including the B13, B14, B15, B17, B23, B28 postcode districts.

Approvals in England

In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.

Questions about external pocket sliding doors in the West Midlands

Is the price different in the West Midlands?

No. Guide prices for external pocket sliding doors are the same across mainland Britain, including West Midlands. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.

How wide can an external pocket sliding door be?

An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.

How much wall do I need for an external pocket door?

An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.

Do external pocket doors need Building Regulations approval?

External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.

External pocket sliding doors in neighbouring areas

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote