- Postcode district
- PO19
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Bognor Regis, Emsworth, Havant
- Building rules
- England
Why choose external pocket sliding doors in Chichester?
A few practical points decide whether external pocket sliding doors suit a particular room and opening:
If the wall beside your Chichester patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
Solid brick, cavity block or timber frame: the way your Chichester wall is built decides how the pocket is formed, which is why the survey looks at it closely.
- When closed, a pocket door looks like a large-paned slider, with slim meeting stiles and plenty of glass instead of the many frames of a folding door.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
How much sun will a door in Chichester get?
Daylight in Chichester runs from about 7 h 56 min in December to 16 h 31 min in June, with the noon sun at roughly 16° and 63° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for external pocket sliding doors in Chichester
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 1 panel | £6,595–£8,095 |
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.6 m | 2 panels | £9,295–£11,395 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Chichester
A surveyor visits your Chichester home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks from survey sign-off — and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Do you need approval in Chichester?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Choosing the specification
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Pocket side. A single pocket to one side, or pockets on both sides so a wide door parts in the middle.
Questions about external pocket sliding doors in Chichester
Do you fit external pocket sliding doors in Chichester?
Yes. We survey and fit external pocket sliding doors in Chichester and across West Sussex, including nearby Bognor Regis and Emsworth. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
Does a pocket in the wall cause heat loss?
A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.