- Postcode district
- GU28
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Midhurst, Haslemere, Arundel
- Building rules
- England
Is an external pocket sliding door a good fit for your home in Petworth?
These are the points a surveyor will go through with you when you choose external pocket sliding doors for a home in Petworth:
If the wall beside your Petworth patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
Want the whole width of your Petworth kitchen open to the garden but prefer the look of sliders to bifolds? A pocket gives you both, at the cost of more building work.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
- A lined and drained pocket carries rainwater running along the track out of the wall, protecting the structure as well as the rollers.
Light and sun in Petworth
The midday sun over Petworth ranges from about 16° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
External pocket sliding doors prices in Petworth
Guide prices include the door, fitting and structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 1 panel | £7,095–£8,595 |
| 3.6 m | 2 panels | £9,295–£11,395 |
| 6.0 m | 3 panels | £12,895–£15,795 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Petworth
Here is the usual sequence in Petworth: guide price, free survey, written quote, any building work, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door. Nearby, we also survey in Midhurst, Haslemere and Arundel.
Do you need approval in Petworth?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for external pocket sliding doors
- Internal finish. Plastered, panelled or tiled finishes on the pocket wall, with the access panel set discreetly into it.
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
Questions about external pocket sliding doors in Petworth
How soon can you survey in Petworth?
Surveys in the GU28 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
How do you maintain rollers inside a wall pocket?
You maintain pocket door rollers through the access panel built into the inside of the pocket wall, which lets the track be vacuumed and the rollers adjusted without opening up the wall. Keep the outside drainage channel clear so water cannot back up into the pocket, and run the panels fully in and out now and then. If a panel starts to rub inside the pocket, a small roller height adjustment through the access panel usually cures it.
Does a pocket in the wall cause heat loss?
A pocket in the wall does not have to cause significant heat loss if it is insulated, lined and sealed as part of the design, and the door itself typically achieves whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better. Wales, Scotland and Northern Ireland have their own energy rules.