- Postcode district
- EX1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Crediton, Exmouth, Tiverton
- Building rules
- England
Why choose replacement sliding doors in Exeter?
A few practical points decide whether replacement sliding doors suit a particular room and opening:
Does the old door in your Exeter kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.
If your Exeter home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
- Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
- New rollers and a precision track make a heavy door glide with a light push, where an old door may need both hands and a firm shove to open.
Light and sun in Exeter
The midday sun over Exeter ranges from about 16° at the winter solstice to about 63° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Sliding door replacement prices in Exeter
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 1.8 m | 2 panels | £3,695–£4,495 |
| 2.1 m | 2 panels | £3,995–£4,895 |
See every size on the replacement sliding doors page or try the guide price tool.
What happens when you order replacement sliding doors in Exeter?
Surveys in the EX1 district are booked at a time that suits you. After you approve the quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors.
Do you need approval in Exeter?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for replacement sliding doors in Exeter
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
Questions about replacement sliding doors in Exeter
Do I need building approval for replacement sliding doors in Exeter?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Will the new door have a lower threshold?
A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.
Do I need building regulations approval to replace a patio door?
In England a replacement door is a controlled fitting, so it must meet the Building Regulations for energy and safety glazing. You do not apply in advance; instead the work is self-certified by a competent person scheme installer or notified to Building Control, which we arrange. In Scotland like-for-like replacement in a house usually needs no building warrant but must still meet the building standards.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.