- Postcode district
- TQ3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Torquay, Totnes, Dartmouth
- Building rules
- England
What replacement sliding doors offer homes in Paignton
The right door depends on the opening, the room and the way you use the garden. Here is how replacement sliding doors tend to work out in practice:
If your Paignton home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
Considering a wider door for your Paignton home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
- Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
Light and sun in Paignton
At the latitude of Paignton, the midday sun climbs to about 63° in late June but only about 16° in late December, when daylight lasts around 8 h 00 min against 16 h 27 min in midsummer. A south-facing replacement sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Typical costs for replacement sliding doors around Paignton
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Paignton home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.6 m | 3 panels | £5,595–£6,895 |
See every size on the replacement sliding doors page or try the guide price tool.
Timescales for replacement sliding doors in Paignton
Here is the usual sequence in Paignton: guide price, free survey, written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). Fitting typically takes 1 day for a straight two-panel swap; 1–2 days for larger doors. Nearby, we also survey in Torquay, Totnes and Dartmouth.
Do you need approval in Paignton?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Specification choices for replacement sliding doors in Paignton
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
Questions about replacement sliding doors in Paignton
Do you fit replacement sliding doors in Paignton?
Yes. We survey and fit replacement sliding doors in Paignton and across Devon, including nearby Torquay and Totnes. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.