- Postcode district
- PL1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Saltash, Tavistock, Liskeard
- Building rules
- England
Why choose replacement sliding doors in Plymouth?
Before you settle on a door type, it helps to know what replacement sliding doors do well and what to check before you order.
If your Plymouth home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
Considering a wider door for your Plymouth home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- Because the opening stays the same size, a straight replacement avoids structural work, steel beams and a Building Regulations structural application.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
Light and sun in Plymouth
Daylight in Plymouth runs from about 8 h 01 min in December to 16 h 26 min in June, with the noon sun at roughly 16° and 63° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Typical costs for replacement sliding doors around Plymouth
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £3,995–£4,895 |
| 2.4 m | 2 panels | £4,295–£5,295 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the replacement sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Plymouth
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Rules for replacement sliding doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Options to consider for your replacement sliding door
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
Questions about replacement sliding doors in Plymouth
Do you fit replacement sliding doors in Plymouth?
Yes. We survey and fit replacement sliding doors in Plymouth and across Devon, including nearby Saltash and Tavistock. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.