- Postcode district
- TN40
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Battle, Hastings, Hailsham
- Building rules
- England
Are replacement sliding doors right for your Bexhill-on-Sea home?
Here is what to weigh up if you are considering replacement sliding doors for a home in Bexhill-on-Sea:
Selling a house in Bexhill-on-Sea in the next few years? Keep the competent person scheme certificate or Building Control notice for the new door with your property paperwork.
If your Bexhill-on-Sea home still has its original sliding patio door, look at the glass beads: if they are on the outside, a replacement will close off that weakness.
- Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
Daylight in Bexhill-on-Sea and what it means for your glass
At the latitude of Bexhill-on-Sea, the midday sun climbs to about 63° in late June but only about 16° in late December, when daylight lasts around 7 h 56 min against 16 h 31 min in midsummer. A south-facing replacement sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Typical costs for replacement sliding doors around Bexhill-on-Sea
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 1.8 m | 2 panels | £3,695–£4,495 |
| 4.0 m | 3 panels | £6,095–£7,395 |
See every size on the replacement sliding doors page or try the guide price tool.
How fitting works in Bexhill-on-Sea
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Bexhill-on-Sea?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your replacement sliding door
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
Questions about replacement sliding doors in Bexhill-on-Sea
Do you fit replacement sliding doors in Bexhill-on-Sea?
Yes. We survey and fit replacement sliding doors in Bexhill-on-Sea and across East Sussex, including nearby Battle and Hastings. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.
Do I need planning permission to replace a sliding door?
Replacing doors on a house is usually permitted development, so no planning application is needed, as long as the new doors are similar in appearance to the existing ones. Flats, listed buildings and properties covered by an Article 4 direction may need consent. Our planning guide explains more.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.