- Postcode district
- OX9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Princes Risborough, Aylesbury, Oxford
- Building rules
- England
Is a replacement sliding door a good fit for your home in Thame?
These are the points a surveyor will go through with you when you choose replacement sliding doors for a home in Thame:
If the existing opening in your Thame home is sound and a sensible size, simply replacing the door gives the biggest improvement for the least disruption.
Considering a wider door for your Thame home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
Daylight in Thame and what it means for your glass
Daylight in Thame runs from about 7 h 47 min in December to 16 h 41 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do replacement sliding doors cost in Thame?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Thame home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 1.8 m | 2 panels | £3,695–£4,495 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the replacement sliding doors page or try the guide price tool.
From survey to fitted door in Thame
We plan the job around your home in Thame: survey first, then a written quote, then manufacture (typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off). The fitting itself usually takes 1 day for a straight two-panel swap; 1–2 days for larger doors. If you are in Princes Risborough or Aylesbury, the same process and prices apply.
Rules for replacement sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for replacement sliding doors in Thame
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
Questions about replacement sliding doors in Thame
Can you match other doors and windows in my Thame home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What happens to my old patio door?
We remove your old patio door and take it away for disposal as part of the job, and that is included in our guide prices, so there is nothing for you to arrange. If you would rather keep the old door, for example for a shed or greenhouse project, tell us before the fitting day and we will leave it safely on site.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.