- Postcode district
- TW20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Slough, Feltham, Hayes
- Building rules
- England
Why choose replacement sliding doors in Egham?
Before you settle on a door type, it helps to know what replacement sliding doors do well and what to check before you order.
If the existing opening in your Egham home is sound and a sensible size, simply replacing the door gives the biggest improvement for the least disruption.
Considering a wider door for your Egham home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
- Because the opening stays the same size, a straight replacement avoids structural work, steel beams and a Building Regulations structural application.
- Multipoint locks, anti-lift devices and internally beaded glass close the security gaps that older patio doors commonly have, such as panels that can be lifted out.
Sunlight, glass and orientation in Egham
Sun angles matter for big glazed doors. Around Egham, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Typical costs for replacement sliding doors around Egham
Pricing is transparent and does not change because you are in Egham. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 2.1 m | 2 panels | £3,995–£4,895 |
| 3.0 m | 2 panels | £4,995–£6,095 |
See every size on the replacement sliding doors page or try the guide price tool.
How fitting works in Egham
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Egham?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for replacement sliding doors?
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
Questions about replacement sliding doors in Egham
How soon can you survey in Egham?
Surveys in the TW20 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
Do I need planning permission to replace a sliding door?
Replacing doors on a house is usually permitted development, so no planning application is needed, as long as the new doors are similar in appearance to the existing ones. Flats, listed buildings and properties covered by an Article 4 direction may need consent. Our planning guide explains more.
Will the new door have a lower threshold?
A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.