- Postcode district
- RH2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Redhill, Horley, Dorking
- Building rules
- England
What replacement sliding doors offer homes in Reigate
Most homeowners choosing replacement sliding doors want the same things: more light, a clear view and a door that is easy to live with.
If the existing opening in your Reigate home is sound and a sensible size, simply replacing the door gives the biggest improvement for the least disruption.
Does the old door in your Reigate kitchen whistle in the wind or leave puddles on the sill? Worn seals and failed drainage are common reasons to replace rather than repair.
- Certification through a competent person scheme installer, or notification to Building Control, is arranged as part of the job and gives you a record for when you sell.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
Planning glass for the light in Reigate
The midday sun over Reigate ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
What should you budget for replacement sliding doors in Reigate?
Use these guide prices to budget. They include VAT, fitting and taking away an old door of a similar size. Taller doors, triple glazing and dual colour add to the figure — the online tool shows how much.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £3,995–£4,895 |
| 3.0 m | 2 panels | £4,995–£6,095 |
| 4.0 m | 3 panels | £6,095–£7,395 |
See every size on the replacement sliding doors page or try the guide price tool.
Timescales for replacement sliding doors in Reigate
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Reigate?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for replacement sliding doors
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Slimline upgrade. Narrow interlocks for the maximum glass area the existing opening allows.
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
Questions about replacement sliding doors in Reigate
Do I need building approval for replacement sliding doors in Reigate?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Do I need building regulations approval to replace a patio door?
In England a replacement door is a controlled fitting, so it must meet the Building Regulations for energy and safety glazing. You do not apply in advance; instead the work is self-certified by a competent person scheme installer or notified to Building Control, which we arrange. In Scotland like-for-like replacement in a house usually needs no building warrant but must still meet the building standards.
Will the new door have a lower threshold?
A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.