- Postcode district
- SP4
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Salisbury, Andover, Devizes
- Building rules
- England
Why choose replacement sliding doors in Amesbury?
These are the points a surveyor will go through with you when you choose replacement sliding doors for a home in Amesbury:
Selling a house in Amesbury in the next few years? Keep the competent person scheme certificate or Building Control notice for the new door with your property paperwork.
If the existing opening in your Amesbury home is sound and a sensible size, simply replacing the door gives the biggest improvement for the least disruption.
- Removal and disposal of your old patio door is included in our guide prices, so there is no separate skip or tip run to organise.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
- Most two-panel replacements are completed in a single day, so the house is secure again by the evening without the room being out of use for long.
Light and sun in Amesbury
Daylight in Amesbury runs from about 7 h 53 min in December to 16 h 35 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do replacement sliding doors cost in Amesbury?
Guide prices are the same across Wiltshire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.6 m | 3 panels | £5,595–£6,895 |
See every size on the replacement sliding doors page or try the guide price tool.
Timescales for replacement sliding doors in Amesbury
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Do you need approval in Amesbury?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Finishes and extras for replacement sliding doors
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
- Aluminium replacement. A thermally broken aluminium slider with slim frames and a durable powder-coat finish.
- uPVC replacement. A cost-conscious choice for a straightforward swap, available in white and foiled colours.
Questions about replacement sliding doors in Amesbury
Do you fit replacement sliding doors in Amesbury?
Yes. We survey and fit replacement sliding doors in Amesbury and across Wiltshire, including nearby Salisbury and Andover. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can I get a bigger door in the same opening?
You can usually get more glass in the same opening, because modern frames are slimmer, but the overall door size stays roughly the same as the old one. Making the door wider or taller means widening the opening, which is structural work with a steel beam, calculations and a Building Regulations application. Our new openings page covers that.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.