- Postcode district
- SO51
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Totton, Eastleigh, Southampton
- Building rules
- England
Is a replacement sliding door a good fit for your home in Romsey?
Most homeowners choosing replacement sliding doors want the same things: more light, a clear view and a door that is easy to live with.
Considering a wider door for your Romsey home while you are replacing it? Weigh up the extra cost of structural work against the gain in glass before deciding.
Selling a house in Romsey in the next few years? Keep the competent person scheme certificate or Building Control notice for the new door with your property paperwork.
- A thermally broken frame with modern double glazing must achieve 1.4 W/m²K or better in England for a door in an existing home with more than 60% glazing, which is far better than most old sliders.
- New rollers and a precision track make a heavy door glide with a light push, where an old door may need both hands and a firm shove to open.
- Slimmer modern frames often give a larger area of glass within the same opening, letting more daylight into the room than the old door did.
How much sun will a door in Romsey get?
At the latitude of Romsey, the midday sun climbs to about 62° in late June but only about 16° in late December, when daylight lasts around 7 h 55 min against 16 h 33 min in midsummer. A south-facing replacement sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Typical costs for replacement sliding doors around Romsey
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Romsey home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.0 m | 2 panels | £4,995–£6,095 |
| 3.6 m | 3 panels | £5,595–£6,895 |
See every size on the replacement sliding doors page or try the guide price tool.
Timescales for replacement sliding doors in Romsey
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a straight two-panel swap; 1–2 days for larger doors for a door like this.
Rules for replacement sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Upgraded glass. Triple, laminated, solar-control or obscure glass to suit the elevation.
- Lower threshold. A reduced-height sill where floor and outside levels allow, with suitable drainage.
- New internal cill or board. A fresh window board or reveal lining to finish the inside neatly.
Questions about replacement sliding doors in Romsey
How soon can you survey in Romsey?
Surveys in the SO51 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium and 2–4 weeks for uPVC after survey sign-off.
What if there is no proper lintel above my old door?
Occasionally an old door frame turns out to be carrying some load because the support above the opening is inadequate or missing. We check the head of the opening at survey and again when the old frame comes out. If extra support is needed, we explain why, what it involves and what it costs before any further work goes ahead.
Will the new door have a lower threshold?
A lower threshold may be possible on a replacement, depending on the floor level inside, the height of the patio or ground outside and how the opening was built. Low thresholds are typically 15–25 mm. A flush threshold needs a drainage channel outside so rain cannot run in. We check levels at survey and tell you what is realistic.
How long does it take to replace a sliding patio door?
Replacing a two-panel sliding patio door typically takes one day, from removing the old door to sealing and trimming the new one. Larger doors, three- or four-panel sets and doors needing extra making good typically take one to two days. Manufacture comes first, typically 4–6 weeks for aluminium or 2–4 weeks for uPVC after you sign off the surveyed specification.