- Postcode district
- PA34
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks for slimline systems after check survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Lochgilphead, Fort William, Dunoon
- Building rules
- Scotland
Why choose sliding doors for extensions in Oban?
Before you settle on a door type, it helps to know what sliding doors for extensions do well and what to check before you order.
For a garden room at the bottom of an Oban garden, think about access: large glass panels need a clear route from the road to the site.
Planning an extension in Oban? Send us the drawings before the steel is ordered, so the beam above the doors can be designed with the door in mind.
- Setting the finished floor level before the screed goes down allows a low threshold, typically 15–25 mm, or a flush one with a drainage channel outside.
- A check survey once the opening is built means the door is made to the real dimensions, accounting for any small variation in the brickwork or blockwork.
- We provide the structural opening size and fitting tolerances in writing, giving your builder a clear target and avoiding disputes about who measured what.
Daylight in Oban and what it means for your glass
Sun angles matter for big glazed doors. Around Oban, midday sun reaches about 57° in summer and drops to about 10° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for sliding doors for extensions in Oban
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 2 panels | £7,795–£9,495 |
| 4.0 m | 3 panels | £8,395–£10,195 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the sliding doors for extensions page or try the guide price tool.
Survey, manufacture and fitting around Oban
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 6–8 weeks for slimline systems after check survey sign-off), and fitting usually takes 1–2 days, scheduled to the build programme. If you are in Lochgilphead or Fort William, the same process and prices apply.
Rules for sliding doors for extensions in Scotland
A Scottish extension is warrant work: the council approves the design, including its doors and glazing, against the Scottish building standards before building starts.
Choosing the specification
- Two-panel slimline. One sliding and one fixed panel, suiting openings up to around 3.6 m depending on the system.
- Flush threshold. A level floor from inside to out, with a drainage channel set into the patio.
- Triple glazing. For low-energy extensions or north-facing walls, subject to panel size limits.
Questions about sliding doors for extensions in Oban
How soon can you survey in Oban?
Surveys in the PA34 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks for slimline systems after check survey sign-off.
Why does the steel beam matter for sliding doors?
The steel beam above an extension's sliding door matters because every beam bends a little under load, and a large sliding door needs a straight, level head to run freely. If the engineer knows a wide slider will sit under the beam, they can design for low deflection. Too much movement can make panels stiff or bind.
How do I get a level threshold in an extension?
A level or flush threshold in an extension needs the finished floor level inside to be set relative to the door sill and the outside paving before the screed goes down. Outside, a drainage channel is needed across the threshold so rain cannot run in. Our thresholds guide explains the options.
Can you measure from drawings rather than the built opening?
We can quote from drawings, but we manufacture from a check survey of the built opening, because real openings often differ slightly from the plans. Making a large made-to-measure door from drawings alone risks it not fitting. If a programme makes that unavoidable, any arrangement and who carries the risk would be agreed in writing first.